รหัสสินค้า:CS-LT-W6
ราคา Unit : ฿ 51,689 - 56,184/pc (ขอส่วนลดพิเศษ) (สินค้าถึงภายใน 30-45 วัน)
น้ำหนักการส่ง: 55.0lb (25kg) ขนส่งสินค้า
Wooden Box: There is total one wooden box.
Tube Size | ¢3.15" x 65" L (¢80mm x 1650mm L) |
Tube Weight | 4.4lb (2kg) |
Package | Fumigation free package |
Packing Size | 72.8" x 15.4" x 15.7" (1850mm x 390mm x 400mm) |
Gross Weight | 55lb (25kg) |
Quality Assurance
1. The warranty period for the first buyer is 300 days.
• If fracture in the glass structure of laser tube occurs within 7 days after the first buyer gets the product, the company is responsible to exchange for free. The company shall not take the responsibility from the 8th day.
• Within 180 days of the date after manufactured, if the user follows the instructions and the power output happens to be lower than 85% of the rated output, our company shall exchange or repair the laser tube with a new one for free. The replaced laser tube enjoys the quality guarantee as the new one from the manufacturing date. The user should pay for one way freight for repair. The company is not responsible for any damage and change of laser structures.
• From the 180th to the 300th days after manufactured, if the user follows the instructions and the power output happens to be lower than 85% of the rated power output, the company shall provide either repair or replace the laser tube with our special tube (depending on specific case) for free. The user should pay for one way freight for the repair. The company is not responsible for any damage and change of laser structures. The warranty for tubes exchanged during this period is four months.
2. The quality assurance is invalidated to the special offered products or customized products.
3. The user must follow the instructions for S2; otherwise the quality guaranteed assurance is invalidated.
4. The matched power supply for each model must be equipped; otherwise the quality guaranteed assurance is invalidated.
5. The returned S-Series products must meet the following qualifications; otherwise the quality guaranteed assurance is invalidated.
1) The appearance, structure and certificate are in good condition.
2) The surface of output mirror is not polluted, cut or splitted.
3)3) The following features shall NOT appear:
Model | The exterior surface of the negative electrode container shall NOT in | The discharge area within the electrode container shall NOT |
S2 | light yellow | >55% |
S4 | brown yellow | >65% |
S6 | purple | >80% |
S8 | purple | >70% |
(The two phenomena are in direct proportion with the intensity of current flow and the usage of super-current. We mainly rely on this method to measure whether the laser is in over-high current state for long time. If this happens, we shall not provide guarantee for the laser. So the user must pay attention in case of losses.)
Please download the Quality Assurance for S-Series to know more information about Quality Feedback.
6. Standard for delivery: S6 rated power 130w and Maximum power 150w.
Sample video for after sales service:
Quality Assurance for S-Series:
Quality Feedback Form:
Reference Pictures for Quality Feedback Form:
seller assumes all responsibility for this listing
จำนวน: ประเทศ:
Shipping and handling | To | Service | Delivery* |
US $75.00 | United States | Express Delivery: TNT/DHL/FEDEX/UPS | Estimated between 3-6 Days |
Handling time |
Will usually ship within 3 business days of receiving cleared payment. |
We have 4 overseas warehouses all over the world now including: Russia, USA, Brazil and Mexico. and We are setting up another one in Europe. Normally, we will ship your order from the nearest warehouse to you. if the stock near you is sold out, we will ship your order to you directly from china. |
|
Payment method |
|
Transaction History
Transactions:
The Laser Tube product is ordering production, need 3 to 5 days of stock up time.
หลอดเลเซอร์ Reci W6 CO2 ขนาด 130-160วัตต์ ระบบหล่อเย็น อายุคลื่น 1 หมื่นชั่วโมง
ให้พลังประสิทธิภาพสูง, ตัดด้วยความเร็วสูง แม้วัสดุเล็กจิ๋ว
ผู้ผลิต: เอเชียแปซิฟิค และประเทศจีน
ระดับคุณภาพ:มาตรฐานระดับสากล
ใช้งานประเภท:เครื่องมือ& เครื่องมือไฟฟ้าอีเลคโทรนิค 8541 อุปกรณ์เซมิคอนดักเตอร์ หลอดไดโอด และอื่นๆ
รุ่น | กำลังไฟ | กำลังสูงสุด | ความยาวหลอด | Φ เส้นผ่านศูนย์กลางหลอด | Catalyze ตัวเร่งปฏิกริยา | อายุการใช้งาน | รับประกัน |
W6 | 130W | 160W | 1650mm | 80mm | Yes | 10,000h | 10 months |
ในกรณีหลอดเกิดการชำรุดใช้งานไม่ได้ ทางบริษัทจะจัดส่งหลอดใหม่ไปให้โดยไม่คิดค่าใช้จ่ายใดๆทั้งสิ้น
ทันทีที่ได้รับสินค้า โปรดเช็คหลอดเลเซอร์ว่าใช้การได้หรือไม่ เป็นสิ่งแรก เพื่อทางบริษัทจะได้มีบันทึกความเสียหายจากการจัดส่งเพื่อเป็นแนวทางแก้ไขต่อไปในอนาคตและทำการจัดส่งสินค้าใหม่ทดแทนได้ทันที
คุณสมบัติหลอดเลเซอร์
กำลัง output : รุ่น W6 อัตรากำลังที่ 130 วัตต์ และให้กำลังสูงสุดถึง 160 วัตต์ ด้วยขั้นตอนการผลิตที่ทันสมัย ทำให้หลอดเลเซอร์ได้มาตรฐาน จึงทำให้หลอดเลเซอร์รุ่นนี้ได้รับการประกันคุณภาพการใช้งาน ซึ่งการใช้งาน การตัดและปรสิทธิภาพการใช้งานได้เท่าเทียมกับหลอดเลเซอร์ขนาด 90 วัตต์ของแบรนด์อื่น (หลอดเลเซอร์แบรนด์อื่นเป็นชนิด เป็นแบบแฮนเมดจึงมีคุณภาพที่แตกต่างๆ กันไป)
อัตราการตัดด้วยแสงสูง : มีอุปกรณ์หล่อเย็นโดยใช้น้ำ และกำลังจะลดลงเหลือ 1 วัตต์ จะหล่อเย็นด้วยน้ำทีุ่อุณหภูมิเพียง 42 องศาเซลเซียส เพื่อทำให้เย็นตัว ในขณะที่หลอดเลเซอร์แบรนด์อื่น ที่ 60 องศาเซลเซียส
โครงหลอด :ตัวหลอดออกแบบมาเป็นพิเศษ เพื่อเป็นหลอดเลเซอร์ชนิด Reci ดังนั้น สามารถใช้ทดแทนการใช้งานหลอดเลเซอร์ของบริษัทได้ ตัวหลอด กันการกระแทก และมั่นใจได้ว่าหลอดจะไม่ถูกถอดออกจากเครื่องขณะขนย้าย ซึ่งแบรนด์อื่นไม่มีโครงหลอดให้แต่อย่างใดความยาวหลอด : ยาว 1.65 เมตร แต่มีแท่งยาวจึงช่วยลดค่าใช่้จ่ายในการขนส่ง (แบรนด์อื่นนั้นมีขนาดขนาด 80 วัตต์ ความยาวอยู่ที่ 1.8เมตร x 150 มม ซึ่งเสียค่าขนส่งที่มากกว่า )ฃ
หลอดเลเซอร์ รุ่น Reci W6 CO2 มีคุณสมบัติให้กำลังงานสูง การออกแบบเยี่ยม อัตราความเร็วการตัดที่สูง และใช้งานกับชิ้นงานขนาดเล็กจิ๋วได้ดี เiหมาะสำหรับ การตัดงาน die cutting แผ่นอะครีลิคหนา
• ให้กำลังการตัดประสิทธิภาพสูง
จะรู้อย่างไรว่าหลอดเลเซอร์ดีหรือไม่ดี?
1) เมื่อประกอบแล้วสามารถใช้งานได้อย่างปกติ
2) ใช้งานกับแผ่นอะเครีลิค
3) ยิงจุดเลเซอร์ลงไปบนแผ่นอะครีลิค
4) หากลำแสงเลเซอร์ที่ยิงแผ่นอะครีลิค สามารถยิงทำให้เกิดร่องรู รูปกรวยลึก แสดงว่าใช้งานได้ดีและผ่านการทดสอบว่าใช้งานได้ดี โดยไม่ต้องกังวลใดๆ
RECI CO2 Laser Tube 130W-160W W6/S6, Water Cooling for the Laser Engraver
High power rate, fast - speed cutting and small size
Origin: Asia and Pacific Area China
Quality standard: International
H.S.Classification: Machinery & Electronics Electr.Element 8541 Semiconductor devices; light - emitting diodes etc.
Model | Rated Power | Max Power | length | Φ | Catalyze | Life span | Warranty |
W6 | 130W | 160W | 1650mm | 80mm | Yes | 10,000h | 10 months |
We will send a new one freely if the tube is broken during transit.
Once received the laser tube, please check again at the first time. We need the damaged record from the courier as the proof before we send the new one free.
Output Power: Its output power can reach 155w. The production process of the tube is standardized, so the output power and output model are guaranteed. (For other laser tube manufacturers: can’t provide this product)
Long life span: We have catalyst plating in the inner wall of the laser tube. Designing lifespan is 10,000 hours and the warranty is 10 months. (No catalyst technique is used by other laser tubes manufacturers. Their lifespan is 3000 hours and the warranty is only 3 months)
High performance cost ratio: High output power, high efficiency, and high performance cost ratio.
High photoelectric conversion rate: The output power will decrease for less than 2w when the cooling water’s temperature is 42℃. Its heat productivity is lower than 100w tubes of other brands. (Other brands: The output power decrease rapidly when the cooling water’s temperature is 42℃)
Appearance: The tube is sealed by metal material. It is industrial product. (No metal material is used by other manufacturers. Their tubes are handmade and need extra water cooling for front and rare mirrors).
Tube frame: This is exclusive design for Reci laser tube. You can use it to install our laser tubes into the machine to spare the freight cost. This frame is shockproof and makes sure the tube will not move during the transport. (No frame is provided by other manufacturers.)
Length: The length is only 1.65m. It reduces the volume of the machine and minimizes freight cost.(The length of other 150w tubes is 1.8m. 150mm must be projecting in the machine. That costs more for machine sheet metal, package and transport.)
Reci W6 CO2 laser tube is featured as high power rate, good model, and fast - speed cutting and small size, which is used for the cutting of DIE cutting, thick acrylic board cutting.
• High power cutting
High photoelectric conversion rate: No compression type water chiller should be equipped. The output power will decrease for less than 1w when the cooling water’s temperature is 42℃. Its heat productivity is lower than 60w tubes of other brands. (Other brands: The output power decreases rapidly when the cooling water’s temperature is 42℃)
Warranty: 10 months, international warranty service, Reci charges the freight for exchanging the defect tube. (For others laser tube brands: warranty for 3 months, no international warranty service)
High performance cost ratio: When you buy Reci W6 130W-160W Laser tube, you can spare money for sheet metal, transport. Besides, you get 10 months warranty and the top level after sale service.
Label
Negative electrode container Output mirror
Product number in metal terminal Tube Model Sample
Laser spot with depth of 5mm
Operating Instruction
Installation Requirement
Make sure to follow the operation instructions of model W6 as shown in the illustration. The dedicated power DY20 should be equipped. The positive pole is in high voltage (The ignition voltage is 28kv). It may cause the following consequence when it is failed to follow the instruction: Arcing; the inner tube will be punctured by electricity and may cause water leakage.
Operation conditions
• Water cooling: Using purified water; 3 to 5 liter / minute; water temperature: 10℃ - 40℃.
• The operating environment: temperature 2 - 40℃, humidity 10-60%.
• The working current: test current is 29mA. Maximum working current is 32mA. The running current must be kept below 30mA. The life span can reach 10,000 hours if the current is kept below 28mA. The ammeter indicating current must be connected to the negative electrode of the laser tube.
• When it is working under over - high current for long term, the negative pole will appear light yellow, and the life span will be reduced rapidly.
• To protect dust from going into the insulation sheath, please wrap it with plastic film.
Working Performance
• Cutting function.
Key Notes
Do not clean the exterior surface of the output widow mirror with tools such as tampon; otherwise the output power will be seriously affected. The followings are the designated methods to clean up pollution in the exterior surface of window mirror:
1) When the mirror is polluted, do not turn on the laser.
2) Blow the mirror surface sideway with air blower.
3) Spray the pure alcohol on the mirror surface with sprayer.
4) Turn on the laser after the alcohol gets fully volatilized.
5) If the methods above don't work effectively, it is necessary to ask for the professional to use tampon with alcohol to clean the mirror surface from middle to edge. The best solution is to prevent the window from being polluted.
Attention:
It is forbidden to clean the mirror with acetone.
The screw in the front and back ends of the laser tube is not allowed to be moved, otherwise the out power will be declined and even the tube may be scrapped.
Put the acryl 300mm far away from output mirror, when testing the laser spot.
Safety
The laser beam is invisible light. Please wear protective glasses when debugging the laser. The positive pole is in high voltage. Pay attention to the security marks.
Storage and Transportation Requirement
Pour out cooling fluid in the event of storage and transportation, and cover the output terminal with a dust - proof plastic bag. The storage environment is 2 - 40℃, and the requested humidity is 10 - 60%. Pack the laser as in the original way.
Important notes: it is requested to cement the sponge together with laser tube to prevent the tube vertically sliding during transportation. The sponge in the side of output mirror must be 70mm beyond it, and the sponge in the side of reflecting mirror must be 50mm wider.
Tubes operated in wrong way will not be guaranteed by Manufacturer.
How to check the laser?
The laser power will reduce gradually while using. When the maximum power can’t carve deep enough, please change the laser tube.
We need to exclude other reason of the problem.
Firstly, make sure following things: Cooling - water flows well and bot hot or dirty. When water temperature is higher, laser’s power will drop fast, or even explode the laser. At this time, change it or add more cooling water.
Secondly, make sure the mirrors, lens and light rought are all good.
Thirdly, make sure the electrical power and fanners is working well. When the temperature of electrical power is higher, it will afect the laser.
In fact, laser’s power will reduce slowly. When the laser is all right, light beam in the tube is pink - purple, when it’s near to be finished, the light change to with.
Learn more about us from the following links:
19th Reklama Pholygraf Trade Fair 2012
ISA International Sign Expo 2012
Buyers say:
Jackson, Andy and David from UK
Adam Fernanders from South Africa
a) The Stepped Price
According to the different procurement quantities of customers, Sign-in-Thai.com formulates different price levels for commodity. Hence, your purchase price will be ultimately attributed to the procurement quantity.
The Stepped Prices shown on the product page is as following:
b) Trial Order Price / Sample Price
We offer free samples or some lower priced products(the product price plus shipping cost only)for our customers easily to experience our products and services from purchasing.
For details, please click:
http://www.sign-in-thai.com/product/sampleproduct.html
c) Limited Time Offers
Every Tuesday Sign-in-Thai.com releases the latest products for Limited Time Offer, and after one week, the original price will be recovered. We sincerely expect your timely attention to the discount activities of Limited Time Offers on Sign-in-Thai.com.
For details, please click:
http://www.sign-in-thai.com/product/discount.html
d) Flash Wholesale
Every Monday Sign-In-Thai.com and cooperation factory jointly campaigns the Flash Wholesale products for bulk purchase customers, and after a week, the original price will be receovered. We sincerely expect your timely attention to the preferential activities on Sign-In-Thai.com.
For details, please click:
http://www.sign-in-thai.com/product/featuredproduct.html
e) You decide the prices for Bulk Orders
If the commodity quality you choose beyonds the quantity of fourth step price on Sign-in-Thai.com, or if you think the website stepped prices don’t meet your bulk purchase demand, you can use our "Make Offer" service on Sign-in-Thai.com to fill out your planned purchase quantity and target price then submit as a Bulk Order, for which we will review and endeavor to realize the deal with you.
If you need bulk order , please enter here to Make Offer:
a) PayPal online payment
https://www.paypal.com/webapps/mpp/buying-online
b) PayPal direct payment (our PayPal account: lyh@chinasigns.cn)
https://www.paypal.com/webapps/mpp/make-online-payments
c) Credit card payment (through PayPal gateway, some areas may be restricted)
https://www.paypal.com/us/webapps/helpcenter/article/?articleID=94038&topicID=11500008&m=TTQ
d) Bank transfer
https://www.paypal.com/us/webapps/helpcenter/article/?articleID=94040&topicID=11500008&m=TTQ
e) Telegraphic Transfer (T/T) payment
(1) Place an order
(2) Get the bank account information of Sign-in-Thai.com
(3) Make the payment at the bank, and get the Payment Receipt
(4) Send the Payment Receipt to service@sign-in-global.com
(5) Receive the Tracking Number of your order
(6) Wait for your order.
Bank transfer payment information:
Learn more about us from the following links:
19th Reklama Pholygraf Trade Fair 2012
ISA International Sign Expo 2012
Buyers say:
Jackson, Andy and David from UK
Adam Fernanders from South Africa
For details, please refer to the following:
a) Bank Transfer (T/T) payment
(1) Place an order
(2) Get the bank account information of Sign-in-Thai.com
(3) Make the payment at the bank, and get the Payment Receipt
(4) Send the Payment Receipt to service@sign-in-global.com
(5) Receive the Tracking Number of your order
(6) Wait for your order.
Bank transfer payment information:
b) PayPal online payment https://www.paypal.com/webapps/mpp/buying-online
c) PayPal direct payment (our PayPal account: lyh@chinasigns.cn) https://www.paypal.com/webapps/mpp/make-online-payments
d) Credit card payment (through PayPal gateway, some areas may be restricted) https://www.paypal.com/us/webapps/helpcenter/article/?articleID=94038&topicID=11500008&m=TTQ
e) Bank transfer (through PayPal gateway) https://www.paypal.com/us/webapps/helpcenter/article/?articleID=94040&topicID=11500008&m=TTQ
f) Western Union Payment
Receiver’s First name: Zifei Receiver’s Last name: Li Address: 4th Floor., Building No.8, Community No.12. Advanced Business Park, No.188 Western Road of the 4th Ring, Fengtai, Beijing.
a) Confirm if your credit card requires verification: https://www.paypal.com/us/webapps/helpcenter/article/?solutionId=10568&m=SRE
b) Confirm if you have exceeded the limitation of maximum amount https://www.paypal.com/us/webapps/helpcenter/article/?solutionId=11516&m=SRE
c) Confirm if you have any other restrictions https://www.paypal.com/us/webapps/helpcenter/article/?articleID=94053&m=SRE
If you failed to make payment via PayPal, please choose Bank Transfer(T/T) or Western Union Payment.We will ship your order by Express or by sea and usually the carriers are FedEx, TNT, UPS, DHL, or EMS. It shall be quite safe during shipping with substantial package. It shall be quite safe during shipping with substantial package. Additionally, we will purchase insurance as a gift for your package.
For details, please click the following links:
Changes & Returns: http://www.sign-in-thai.com/info/ChangesandReturns.html
Warranty: http://www.sign-in-thai.com/info/QualityWarranty.html
Q | What should I do, when the laser can't cut through the acryl or the output power is getting lower? |
A |
|
Q | What is the reason if the laser beam is weak or the beam is in color light blue? |
A |
|
Q | Why can water go into the inner tube? |
A |
|
Q | What is the reason when there is sparking in positive electrode? |
A |
|
Q | Do you have laser tubes stronger then 300W? |
A |
|
Q | Thanks a bunch for sharing this with all of us you actually recognize what you're speaking approximately! Bookmarked. Kindly additionally seek advice from my website =). We will have a hyperlink exchange arrangement between us! |
A |
|
Write a review for หลอดเลเซอร์ Reci W6 CO2 ขนาด 130-160วัตต์ ระบบหล่อเย็น อายุคลื่น 1 หมื่นชั่วโมง --- RECI CO2 Laser Tube 130W-160W W6/S6, Water Cooling for the Laser Engraver
฿51,689 - 56,184/pc ขั้นต่ำให้การสั้งซื้อ : 1 pc |
|
อัพเดท ส่วนลด ข้อเสนอพิเศษ รายการฟรี และ รางวัลเงินสด
www.Sign-in-Thai.com, It is the biggest online supplier of sign products in Thailand and specialized in providing One Stop Solution for customers to select AD equipments, AD consuming materials, sign exhibition products, etc. We have set up overseas branches in 6 foreign countries in order to provide better service for our customers all over the world. Our products cover all field of the AD and signage and all the products we supply are made in accordance with international quality standards as a result that, at present, we have more than 9,000 products online for sale. Since we implement the centralized purchasing, all the products are quoted with competitive prices and good quality.