24pcs/pack P-3000A Polymeric adhesive for signage

See larger image and other views (with zoom)

24pcs/pack P-3000A Polymeric adhesive for signage

รหัสสินค้า:CS-CL-P-3000A

ราคา Unit : ฿ 5,504/pack (ขอส่วนลดพิเศษ) (สินค้าถึงภายใน 14-20 วัน)

กรุณาเลือกประเภท

White Transparent Black Grey

จำนวน: pack(s) Total Cost:
THB ฿5,504
น้ำหนักการส่ง: 18.7lb (8.5kg) ขนส่งสินค้า
item added to cart

0 total in your Cart, Cart Total: ฿

seller assumes all responsibility for this listing

Shipping and handling

จำนวน: ประเทศ:

1. If you choose to ship by Express, you can see the shipping fee is a little High, but it can deliver to your door within 3-5 days, you need only to make the payment and wait.
2.If you choose to ship by sea, the shipping fee is lower, and you need to go to the ports to make the clearance at the Customs, and take the good from the port to your home by yourself.Generally it takes from10 to 30 days, depending on the consignee address.

Handling time

Will usually ship within 3 business days of receiving cleared payment.

Ship from where?

We have 4 overseas warehouses all over the world now including: Russia, USA, Brazil and Mexico. and We are setting up another one in Europe. Normally, we will ship your order from the nearest warehouse to you. if the stock near you is sold out, we will ship your order to you directly from china.

Return policy

Purchases can be returned under the following conditions:: 1) There are quality problems after opening the package.; 2) Products are different than on the order list.; 3) Products are irreparably damaged during transportation.

Payment details

Payment method

1.Paypal (online payment)
2.Creidit card
3.Bank Transfer (T/T)
4.Western Union online/offline payment

Transaction History

Transactions: 0

Features
1. Waterproof and moisture-proof;
2. Polymer nanotechnology;
3. Anti-aging
Durable paste, resistant to aging, chalking, weathering and thermal cycling, without hardening, shrinking or cracking;
4. No fear of high and low temperature difference
No fear of extreme temperature difference environment test, can withstand heat and cold.
Lowest temperature resistance:-50℃
In severe cold conditions, no degumming or cracking
Maximum temperature resistance:200°C
In high temperature environment, it will not melt or corrode.

Specifications
Model: P-3000A
Package: 24pcs/pack
Glue color: black,white,transparent,Grey
Product Name: Logo Engineering Polymer Adhesive
Adhesive strength:80%
Operating time:4-7 minutes
Product specification: 300ml
Clamping time: surface dry 25-35 minutes, fully dry 36-48 hours
Storage conditions: store at room temperature and avoid light
Shelf life: The shelf life of unopened products is 12 months
Application range: signage structure installation, signboard luminous liner bonding, card body sealing, acrylic signboard,
Metal three-dimensional characters installation background wall, shop signboard
Note: The lower the temperature, the slower the positioning time will be

Instructions
1. Cut off the unthreaded part of the head
2. Cut the nozzle obliquely according to the needs
3. Insert the glue gun and tighten the glue nozzle
4. Adjust the glue gun and start sizing

Precautions
1. Please ensure that the surface of the bonded object is clean and dry without any dirt, such as: pigment, oil stains, lubricating oil and rust.
2. Take the product out of the refrigerated environment and use it before the glue arrives. The best use temperature should be between 18-32 degrees.
3. After the operation is completed, the unused glue should be tightened immediately and sealed for storage. When using it again, if there is a little crust on the seal, just remove it, and it will not affect the normal use.
4. Avoid contact with eyes, skin and clothing. After contact with the skin, please wash it with soapy water immediately. If it accidentally splashes into the eyes, please rinse it with plenty of water immediately. If you feel seriously uncomfortable, you must go to the hospital for examination.
5. If you need to use a dispensing machine to apply glue, it is recommended to soak the dispensing needle in a container containing silicone oil when the operation is over or interrupted to prevent the needle from freezing, and take out a small amount of glue in the needle when working again.