Luxury Manual Acrylic Letter Making Bending Machine Tool, A+U Type

See larger image and other views (with zoom)

Luxury Manual Acrylic Letter Making Bending Machine Tool, A+U Type

| 43 Transactions

รหัสสินค้า:SIT-CS-HD-BC06

ราคา Unit : ฿ 753/set (ขอส่วนลดพิเศษ) (สินค้าพร้อมส่ง)

จำนวน: set(s) Total Cost:
THB ฿753
น้ำหนักการส่ง: 2.2lb (1kg) ขนส่งสินค้า
item added to cart

0 total in your Cart, Cart Total: ฿
Customers Who Bought This Item Also Bought

< >
ชุดดัดป้ายตัวอักษรโลหะรูปแบบแกนคู่ระยะความกว้างการดัด 100 ม.ม.--- Dual-axis Metal Channel Letter Angle Bender Bending Tools, Bending Width 100mm

฿1,288 - 1,464/set

1200mm เครื่องดัดอะคริลิก ด้วยความร้อน สำหรับดัดแผ่น PVC , อะคริลิก , พลาสติก เพื่อผลิตป้ายไฟกล่องแสง , ขนาดตัวเครื่อง 48"(1200 ม.ม.) ความหนาของ วัสดุอะคริลิก 1 - 6 ม.ม.

฿1920/set

ชุดดัดป้ายตัวอักษรโลหะรูปแบบแกนคู่ระยะความกว้างการดัด 100 ม.ม.--- Dual-axis Metal Channel Letter Angle Bender Bending Tools, Bending Width 100mm

฿1,288 - 1,464/set

1200mm เครื่องดัดอะคริลิก ด้วยความร้อน สำหรับดัดแผ่น PVC , อะคริลิก , พลาสติก เพื่อผลิตป้ายไฟกล่องแสง , ขนาดตัวเครื่อง 48"(1200 ม.ม.) ความหนาของ วัสดุอะคริลิก 1 - 6 ม.ม.

฿1920/set

seller assumes all responsibility for this listing

Shipping and handling

จำนวน: ประเทศ:

1. If you choose to ship by Express, you can see the shipping fee is a little High, but it can deliver to your door within 3-5 days, you need only to make the payment and wait.
2.If you choose to ship by sea, the shipping fee is lower, and you need to go to the ports to make the clearance at the Customs, and take the good from the port to your home by yourself.Generally it takes from10 to 30 days, depending on the consignee address.

Handling time

Will usually ship within 3 business days of receiving cleared payment.

Ship from where?

We have 4 overseas warehouses all over the world now including: Russia, USA, Brazil and Mexico. and We are setting up another one in Europe. Normally, we will ship your order from the nearest warehouse to you. if the stock near you is sold out, we will ship your order to you directly from china.

Return policy

Purchases can be returned under the following conditions:: 1) There are quality problems after opening the package.; 2) Products are different than on the order list.; 3) Products are irreparably damaged during transportation.

Payment details

Payment method

1.Paypal (online payment)
2.Creidit card
3.Bank Transfer (T/T)
4.Western Union online/offline payment

Transaction History

Transactions: 43

Buyer
ราคา Unit
จำนวน
Order Date

Daw****
$753.00
1 set
2024-10-04

Dor****
$761.00
1 set
2024-09-23

Peg****
$769.00
1 set
2024-09-15

Mir****
$777.00
1 set
2024-09-01

Ane****
$784.00
1 set
2024-08-19

Yas****
$792.00
1 set
2024-08-05

Lei****
$792.00
1 set
2024-07-27

Ant****
$792.00
1 set
2024-07-18

Cor****
$800.00
1 set
2024-07-02

Lyn****
$800.00
1 set
2024-06-22

Tov****
$800.00
1 set
2024-06-12

Nil****
$800.00
1 set
2024-06-02

Sim****
$808.00
1 set
2024-05-14

Sha****
$800.00
1 set
2024-05-01

Bas****
$800.00
1 set
2024-04-15

Nor****
$838.00
1 set
2024-04-02

Mos****
$838.00
1 set
2024-03-18

Dia****
$838.00
1 set
2024-02-28

Mad****
$830.00
1 set
2024-02-14

Ang****
$822.00
1 set
2024-01-22

ดูทั้งหมด 43 Transaction History

Luxury Manual Acrylic Letter Making Bending Machine Tool, A+U Type
Description:
Processing Material: Acrylic, Plastic, PVC, Plexiglass
This Luxury Manual Acrylic Letter Making Bending Machine Tool, A+U Type is ideal for LED Acrylic Lighting Channel Letters, acrylic sign letters making.
It is suitable for heating acrylic within 1.5mm-4mm (0.06" x 0.16") thickness.

• Adopting PTC heating elements;
• Aluminum alloy thermal conductive plate is heating even;
• Adopts high quality heat-resistant engineering plastics, non-stick the acrylic sheet;
• Easy to operate and durable.

• PTC heating elements have features of safe and energy-saving, fast heat up, durable, automatic temperature control.
• Aluminum alloy thermal conductive plate can automatic adjust the angle between heating plate and acrylic.
• Making angle bending straight.
• Make your curved angles in beautiful arc.
• Easy operation, time-saving.
• Warranty: 2 years.

Voltage: AC 100-240V
Constant Power: Arc bending 60W±10%, Angle bending 39W±10%
Heating Temperature: 200°C±5%
Bending Letter Hight: 0 - 100mm (3.9")
Bending Thickness: 1.5mm - 4mm
Arc bending soft time (2.5mm thickness, 20℃): About 9 seconds
Angle bending soft time (2.5mm thickness, 20℃): About 3 seconds
Arc Heater Size: 100mm x 50mm x 2mm (3.9" x 2" x 0.08")

360 Degree Rotate End: Many tools are used frequently, its power cable is easy to get kink and break up. But our CS-HD-BC06 acrylic bending machine tool can avoid this situation because of the 360 degree rotate design of the power cable and heating plate joint.

Remarks:
• You’d better use the bender with proper strength; otherwise it will cause heat loss and heat uneven.
• If the arc length is greater than heating plate breadth, you can use the arc bender to heat 1-3 times continuously and arrange in a row. The arc length be bent is within 150mm.
• With short preheat time; restart the bender won't waste too much time. If you do not use it more than 5 minutes, please shut off the power switch to save electricity.
• Please do not put the heating plate onto the power cable.
• Kindly remind you that heating transparent acrylic could leave tiny marks on the material, which is not clear on the acrylic of other colors. Please notice it when you place an order.
• 1pc PTFE Coated Fiberglass Adhesive Tape will be gift for you when you buy A type angle bending tools.

How to use the High Temperature PTFE Coated Fiberglass Adhesive Tape?
Place cut the adhesive tape into 3mm width, and then stick them on both sides of angle bender respectively. The PTFE Coated Fiberglass adhesive tape can be used many times.
You can use the PTFE Coated Fiberglass Adhesive Tape when you want heat PVC board.

Comparison for Our Original Acrylic Bender and Copycat Acrylic Bender

For now there are many copycat acrylic bender, Acrylic bending machine, handheld acrylic bending tools in the market with inferior quality and awful performance.

It will highly effect work efficiency in 3D letter channel making process.

We list the comparison between our original acrylic bender and copycats acrylic bender as below; it is for clients better knowing how to choose acrylic bender before purchase.

We bought copycats products below and disassemble them to list their parts and our acrylic bender inside parts for clients better knowing about their quality.


Heating plate of our Acrylic Bender	Heating plate of COPYCAT Acrylic Bender

Temperature Control PCB part of our Acrylic Bender	Temperature Control PCB part of COPYCAT Acrylic Bender

Power Switch part of our Acrylic Bender	Power Switch part of COPYCAT Acrylic Bender

Power Plug of our Acrylic Bender	Power Plug of COPYCAT Acrylic Bender

PERFORMANCE COMPARISON

Our Acrylic Bender	COPYCAT Acrylic Bender


About heating insulation film, the reason our acrylic bender do not put heat insulation film is the operator do not need to use finger to clamp this area to bend acrylic sheet. If you choose our original acrylic bender, you just need to handheld to operate as bellow. As the copycat cannot hold the acrylic sheet seamlessly so that will need your finger to help to bend it like below picture, so they have to put insulation film or their acrylic bender cannot hold and bend acrylic bender fully.

Our Acrylic Bender	COPYCAT Acrylic Bender
About Vertical guide in copycat products, as we design acrylic bender its head are all flat, so it will have an vertical angle against desk when operator use it, so this vertical guide is totally useless. Our Acrylic bender head are all designed to be flat, that will have vertical angle when operator use it against desk

Connect the power cable, after about 60 seconds heating time, you can use the bender.

Using the angle or arc bender vertically clamp the acrylic plate, soften the acrylic plate several seconds, and then remove the bender, make angle and arc you want, fix it with glue.

Sharp Corner Bending Machine Tool (Acrylic Angle Bending Machine Tool)

Round Corner Bending Machine Tool (Acrylic Arc Bending Machine Tool)

Processing Material: Acrylic, Plastic, PVC, Plexiglass
This type acrylic bender is ideal for LED Acrylic Lighting Channel Letters, acrylic sign letters making.

1. I don’t know this website well, how can I trust you?

Sign-in-Thai.com has launched online bussiness for 6 years who already has established customers over 120 countries and areas. We are the lifelong member of ISA and SGIA, and the verified user of PayPal as well as approved by BBB certification.

Learn more about us from the following links:

19th Reklama Pholygraf Trade Fair 2012

ISA International Sign Expo 2012

Exhibition of International Trade Fair for Visual Communication, Technology and Design in Düsseldorf, 2011

Buyers say:

John Hanmer from USA

Jackson, Andy and David from UK

Ben Wong from Thailand

Adam Fernanders from South Africa

JLuciano from Brazil

Adam Fernanders from Australia

More

2. Not clear about the Price Policy of Sign-in-Thai.com?

3. How to pay? Can I use credit card?: You may use the following methods of payment: PayPal online payment, PayPal direct payment, credit card (through PayPal gateway, some areas may be restricted), bank transfer, and Telegraphic Transfer (T/T) payment.; For details, please refer to the following:; a) PayPal online payment
https://www.paypal.com/webapps/mpp/buying-online

b) PayPal direct payment (our PayPal account: lyh@chinasigns.cn)
https://www.paypal.com/webapps/mpp/make-online-payments

c) Credit card payment (through PayPal gateway, some areas may be restricted)
https://www.paypal.com/us/webapps/helpcenter/article/?articleID=94038&topicID=11500008&m=TTQ

d) Bank transfer
https://www.paypal.com/us/webapps/helpcenter/article/?articleID=94040&topicID=11500008&m=TTQ

e) Telegraphic Transfer (T/T) payment
(1) Place an order
(2) Get the bank account information of Sign-in-Thai.com
(3) Make the payment at the bank, and get the Payment Receipt
(4) Send the Payment Receipt to service@sign-in-global.com
(5) Receive the Tracking Number of your order
(6) Wait for your order.

4. Is it safe to pay online? Will it occur any security problems concerning my personal information?: PayPal, one of the faster and safer ways to pay and get paid online, has worldwide 113 million active accounts, and supports 190 markets and 25 currencies. As a result, PayPal enables global commerce. For details:
https://www.paypal.com/webapps/mpp/paypal-safety-and-security

5. Why did my PayPal payment fail?: The main reasons of failures and solutions:; a) Confirm if your credit card requires verification:
https://www.paypal.com/us/webapps/helpcenter/article/?solutionId=10568&m=SRE; b) Confirm if you have exceeded the limitation of maximum amount
https://www.paypal.com/us/webapps/helpcenter/article/?solutionId=11516&m=SRE; c) Confirm if you have any other restrictions
https://www.paypal.com/us/webapps/helpcenter/article/?articleID=94053&m=SRE

6. How can I know if it is paid successfully?: We will send you a payment confirmation email upon receiving your payment, and your purchase order in “My Account” will be categorized as “Paid”. If you use check or Telegraphic Transfer (T/T) payment, we will change the status of your order until your payment confirmed , and then we will send you the conformation email.

7. How long can I receive the items?: Normally speaking, we will spend 1 or 2 days to prepare the order and if it requires longer time, we will inform you as soon as possible. The general shipping time will be 3 to 7 days. Therefore, under normal situation, you will receive the items in 4 to 9 days.

8. How to receive my order ? Is it safe during shipping?: For the items you purchased online, we will arrange international express delivery to ship and usually the carriers are FedEx, TNT, UPS, DHL, or EMS. It shall be quite safe during shipping with substantial package. Additionally, we will purchase insurance as a gift for your package.

9. How to obtain the tracking number of shipment? And how to contact the carrier (express delivery company)?: We will send you the tracking number after shipping your items, hereby please keep on checking your email.

10. How to return items and how about the warranty?: For details, please click the following links:; Changes & Returns: http://www.sign-in-thai.com/info/ChangesandReturns.html; Warranty: http://www.sign-in-thai.com/info/QualityWarranty.html

11. If I still have questions to this product, what shall I do?: Please click on the product page and submit your questions, we will reply you as soon as possible.

12. How to change my shipping address?

You can change your shipping address on the confirmation page of your purchase order.